1. Open the packing and check the product tenderly 2. If any damage, please contact your seller. 3. Do not use the defective product. 4. Installed by licensed electrician 5. Disassembly and repair is prohibited by non professional person, warranty is not offered to those products which are disassembled and repaired
Installation:
1. Make sure power is off before installation 2. Make two holes as “A” and tight with screws 3. Rotate the light to adjust the needed lighting angle 4. Connect light with LED driver。 5. Connect cable 6. Turn it on
Glitter flood light uses aluminum alloy as heat sink, very elegant appearance. This kind of casing make light very stable and good heat dissipation. With continuous working, the temperature of casing is less than 45℃, can reduce light decay and prolong LED life. The lifespan can be up to 50,000 hours, besides, the LED driver support over-temperature protection functions, and all materials are anti-UV rated. Application: Billboard. Road . Tunnel. Bridges and culverts. Square. Building. etc.
